Logic 3 V5.00 Manual Do Utilizador

Enter the appropriate details for the email that will be sent.  To add, edit, or remove email recipients, use the 

“Recipients” section and the appropriate buttons.  Enabling “Attach Still Shot” will add a still image of the 
selected cameras to the outgoing email.  This image is from the beginning of the triggered alarm event. 

 

 

 For email options to function properly, a valid SMTP server must be set up correctly in 

the “DVR Settings” tab. 

When enabled, opens an alarm window on the DVR.  You can also select a monitor to 
output the specified camera feed to using the “Monitor Output” dropdown box. 

This option, which will only work in conjunction with enabling Popup Alarm Screen, 

will prevent a flood of email alerts being sent out.  It will only send out one email 
alert until the alerts have been acknowledged on the Popup Alarm screen.  If alerts 

have been set to auto acknowledge, it will send out an email after each period of 
auto acknowledgement has passed. 

Enables audio notification which plays a system beep or wave file when an alarm is 

triggered.  When “Wave File” is selected, click “…” to browse for the wave file that 
will be played. 

The Vigil Server Software can be configured to receive and record information from point of sale data 
terminals.  The “Data” tab allows configuration of the data terminal settings. 

 

 

 
To configure a data terminal, select one from the dropdown box and click “Enabled”. 
 

POS Terminal Type  Sets the terminal type for the POS data stream. 

A priority camera is automatically selected when reviewing video and POS data from 
this terminal. 

3xLogic Vigil System Server Software - User’s Guide    Doc# 08100610 Page 

103