Logic 3 V5.00 Manual Do Utilizador

 

 
By default, the “Live Viewer” window will open once the program has loaded.  If “Auto Logon” is disabled, you 

must log in before the “Live Viewer” window is opened. 
 

 

 The Live Viewer window may be slightly different depending on the capture card that is 

installed, the rendering mode enabled (hardware vs. software), and the number of supported video 

channels.  See section 5.2.6 for details. 

 

The “Live Viewer” window can be in either software rendered mode or hardware rendered mode.  If your 
capture card supports hardware rendered mode, it can be enabled by going to “Settings” window | “DVR 

Settings” tab | “Live” tab and selecting the Live Viewer mode with the available radio button. 
 

•  Cannot display camera footage at full frame rates 

•  More CPU usage 

•  Able to display up to 32 camera feeds, 16 simultaneously 

•  Able to display network camera feeds 

•  Information overlays such as recording status and people counting 

•  Zooming displayed camera feeds 

•  TV output and analog multiplexing 

•  Able to display up to 16 camera feeds at full frame rates 

•  Less CPU usage 

•  Cannot display network camera feeds (but footage can still be recorded and is accessible 

by the search function) 

•  Cannot display information overlays 

•  Cannot zoom displayed camera feeds 

•  Does not support TV output and analog multiplexing 

3xLogic Vigil System Server Software - User’s Guide    Doc# 08100610 Page 

14