Logic 3 V5.00 Manual Do Utilizador

3xLogic Vigil System Server Software - User’s Guide    Doc# 08100610 Page 

18 

 

To quickly select a camera for single view display mode, click its corresponding 

number.  It also provides a simple way to check which cameras are recording. 

: “Constant” recording mode and is recording 

 

: “Motion” recording mode and is recording (motion detected) 

: “Motion Alarm” recording mode and is recording (motion detected).  If POS 

data alarms are configured, it can also mean a POS data alarm. 

 (motion currently not 

 

: Camera is currently not recording, but is enabled 

: Camera is not recording and is disabled 

:  Set to a motion recording mode and is recording

detected and will stop after the “Post Motion Record” time has elapsed)

ss with USB digital I/O boards.  Please see the contact 

formation at the end of this guide if you are interested in obtaining these devices. 

 

Input alarms can trigger recording of video and/or audio based on an externally tripped circuit.  Output relays 
can be triggered by motion alarms, video loss, POS data, or failure of the DVR. 

 
More information on configur g these devices can be found in the “Settings” section. 

 

Depending on the hardware installed with your DVR unit, you may have access to digital inputs and outputs 
that can be configured as input alarms or output relays.  The number of available alarms and relays is 

ependent on your hardware, but is nearly limitle

d

in

in

 

Opens the corresponding window, “Live Alarms” or “Relays”. 

 

To assist in wiring alarms an
the frame titles on the alarms and relays windows. 

 

d relays, the hardware locations of the digital inputs and outputs are indicated by 

The “Live Alarms” window indicates configured input alarms. 

 

: Alarm input is enabled 

 

: Alarm input is triggered 

 

The “Relays” window indicates configured output relays and allows manual 

control of relays. 
 

: Output relay is enabled and configured 

: Output relay is triggered 

 
You can manually turn on/off some relays by clicking on their respective button.  

The 4

th

 relay has been set to stay closed while the application is open and 

cannot be turned off manually.