Logic 3 V5.00 Manual Do Utilizador

The “Camera Setup” tab provides all of the settings for configuring DVR-controlled cameras.  The settings are 

divided into two sections: general camera setup and a series of tabs controlling recording options. 

3xLogic Vigil System Server Software - User’s Guide    Doc# 08100610 Page 

51 

 

The camera setup settings allow configuration of the camera image, resolution, recording speed, buffering, 

and recording codec.  Network cameras are also enabled here. 
 

 

 

If you wish to apply the same settings to all cameras, click the “Apply to All” button at the 
top of the window.  Settings that will be applied to all cameras will be indicated by BOLD 

headings.  Only changes made after clicking “Apply to All” will be applied to every camera. 

This drop-down box lets you select which camera you wish to change the settings. 

 

Allows you to change the name of currently selected camera.  Camera names can be up to 

12 characters in length. 

Brightness 

Adjusts the brightness of the recorded image. 

Adjusts the contrast of the recorded image. 

Adjusts image sharpening, to the right is increased sharpness. 

Adjusts the colour of the image. 

Adjusts the U and V colour difference signals used in YUV colour format.  Note that not all 
cameras use a YUV colour format, in which case, adjusting the Saturation U slider will 
adjust the colour saturation while the Saturation V slider will have no effect.