Logic 3 V5.00 Manual Do Utilizador

Allows you to select if all client connections receive motion alarm notifications or only 

the client connection at the top of the list. 

The number of attempts to retry sending a motion alarm to a client connection. 

Number of seconds to wait between retries. 

If the video signal is lost from an enabled camera, you can specify an action to take in the “Video Loss” tab. 

 

 

 

Enables hardware signal loss detection if the capture card has support for this 
feature. 

Allows adjustment of the software signal loss detection algorithm. 

Enables software signal loss detection.  Can be used in addition or in place of 
hardware signal loss detection. 

Enables the DVR to continue recording during signal loss detection events.  Normal 

operation turns off recording for video feeds with no signal detected. 

Enables email notification for video loss events for the selected camera.  Click “Email 
Settings…” to configure email settings and email notification recipients. 

Enables an output relay to be triggered when a video loss is detected for the selected 
camera. 

Specifies which detected relay to trigger. 

There are two trigger types: a momentary trigger of 2 seconds or a latched trigger 

which will stay triggered until video feed is recovered. 

When enabled and live video is lost for the selected camera, email is sent to recipients specified in the Email 
Settings. 

 

3xLogic Vigil System Server Software - User’s Guide    Doc# 08100610 Page 

75