Lightwave Communications Switch 8200 Manual Do Utilizador

 

19 

The 

Port Setup

Port Setup menu allows users to change several options for each port.  To 

change the server port name, use the up and down arrow keys to move the highlight bar 
to the desired server port, and press 

<ENTER>

<ENTER> to select that server port for change.  

The user may enter the new server port name once the highlight bar changes to show 
only the server port name.  The new server port name overwrites the old server port 
name; if the new server port name is shorter than the old name, then the user must 
erase the remaining characters by pressing delete.  Press the 

<ENTER>

<ENTER> key after typing 

the new server port name to change the name, or press 

<ESC>

<ESC> to discard the change 

and exit back to the 

Port Setup

Port Setup menu. 

 

If the ServerSwitch detects that there is no power from the attached servers on the 
keyboard/mouse lines, or if no server is present, then the ServerSwitch will indicate that 
port as inactive on the front panel LCD.  The user may want to prevent this message 
from appearing on the front panel to reduce possible confusion.  In the port setup menu, 
move the highlight bar to the port and press 

F8

F8 to toggle the inactive message on or off.  

If the message is on, a 

+

+ will appear next to the port name; if it is off, a –

– will appear 

next to the port name.  All ports have the inactive message enabled by default. 
 

Individual port may be selected or deselected for inclusion in the auto scan.  In the port 
setup menu, move the highlight bar to the port and press + to enable auto scan and – to 
disable auto scan.  A   symbol next to the port name indicates that the port is enabled 
for auto scan.  All ports are enabled by default.