Lightwave Communications Switch 8200 Manual Do Utilizador

 

5

 

Connectors on a Sun® CPU with HD15 video output 

 

 

CPU connectors on the ServerSwitch 8200 

 
Connecting Sun® servers to the ServerSwitch 8200 is very simple.  First, be sure that 
power is off to all CPUs that will be connected to the ServerSwitch 8200.  A video cable 
should be connected to the video output of the Sun® server that will be connected to 
the ServerSwitch.  The other end of the cable should then be connected to one of the 
13W3 or HD15 female connectors marked “SWITCHED INPUTS” on the rear of the 
ServerSwitch.  An 8 pin mini-DIN cable should then be connected to the 
keyboard/mouse output of the server, with the other end connected to the “SWITCHED 
INPUTS” keyboard/mouse input port above the previously connected video port on the 
ServerSwitch 8200.  Repeat this process for each server that is to be attached to the 
ServerSwitch.