Liebert Autochangeover Controllers AC4 Manual Do Utilizador

Upload the Configuration File
13. At the prompt to Initiate an Upload of Configuration File, enter Y (Yes - begin) or N (No - cancel). 

The current setting appears in brackets—[N] in the following example.

14. At the top of the HyperTerminal window, shown below, click on Transfer, then on Send File.

15. In the Send File window, as shown above:

• In the Filename box, enter the full path of the file to be uploaded—for example, 

AC4_CONF.SAV—or click on the Browse button to locate the file.

• In the Protocol box, select Xmodem from the drop-down list.
• Click on the Send button. (To close the window without sending the file, click on Close or 

Cancel.)

16. When the transfer is complete, a confirmation message—“Upload Successful”—appears in the 

Service Terminal Interface window and the AC4 reboots with the new configuration.

>INITIATE AN UPLOAD OF CONFIGURATION FILE-YES(Y) OR NO(N)?
>[N]
>[