Lenovo 4424-HB6 Manual Do Utilizador

Chapter 2. Adjusting and using your monitor

 

 

Before rotating the monitor, you should set-up your computer to rotate the image. 
Rotating the image may require special rotation software or you may find that your 
computer is preloaded with video graphic drivers that allows image rotation. Check 
the Graphic Properties setting on your computer to see if this feature is available. 

Try these steps to check if image rotation is available on your computer. 

1.  Right-click on the desktop and click Properties. 
2.  Select the Settings tab and click Advanced. 
3.  If you have ATI, select the Rotation tab and set the preferred rotation. If you have 

nVidia, click the nVidia tab, in the left-hand column select NVRotate, and then 
select the preferred rotation. If you have Intel, select the Intel graphics tab, click 
Graphic Properties, select the Rotation tab, and then set the preferred rotation. 

Check with the manufacturer of your computer to see if graphic drivers with image 
rotation can be downloaded from their support website. 

 

 

Be sure to turn off the power before you perform any maintenance on the monitor.   

●   

 

Apply water or liquid directly to your monitor. 

●    

Use solvents or abrasives.

 

●    

Use flammable cleaning materials to clean your monitor or any other electrical   

equipment.  

●    

Touch the screen area of your monitor with sharp or abrasive items. This type of   

contact may cause permanent damage to your screen. 

 

●    

Use any cleaner which contains an anti-static solution or similar additives. This   

may harm the coating of the screen area.   

●    

Lightly dampen a soft cloth with water and use this to gently wipe the covers   

and the screen.   

●    

Remove grease or finger marks with a damp cloth and a little mild detergent.

 

 

 

After placing the monitor face down on a clean surface or soft cloth, remove the four 
screws from the stand to remove it from the monitor.