Land Pride Saw PR1560 Manual Do Utilizador
13
Section 4: Maintenance and Lubrication
PR1560 & PR1572 Powered Rakes 314-164M
Land Pride
7/14/08
10435
Step 2
Remove backup ring, lock collar,
compression spring, bottom
backup ring, and balls.
compression spring, bottom
backup ring, and balls.
Step 3
Tighten the four hex nuts
uniformly until the clutch pack
and hub are loose.
uniformly until the clutch pack
and hub are loose.
Step 4
Bend all four retaining lugs out on
edge of clutch housing.
edge of clutch housing.
Step 5
Remove thrust plate with
Belleville Springs and lug rings to
access friction discs and hub for
inspection or service.
Belleville Springs and lug rings to
access friction discs and hub for
inspection or service.
2-Plate Disassembly
Step 1
Remove snap ring.
Step 6
Inspect friction discs and hub.
10449
Step 2
Compress Belleville Springs to
the pressure plate by tightening
the four hex nuts and then
placing the assembly into the
clutch housing.
the pressure plate by tightening
the four hex nuts and then
placing the assembly into the
clutch housing.
Step 3
Bend retaining lugs inward over
the Belleville Spring edges to
secure the spring before backing
the four hex nuts off.
the Belleville Spring edges to
secure the spring before backing
the four hex nuts off.
Step 4
With lugs bent in, loosen the four
hex nuts completely to the end of
the threaded studs.
hex nuts completely to the end of
the threaded studs.
Step 5
Insert greased balls.
Step 6
Install bottom backup ring,
compression spring, lock collar,
and top backup ring.
compression spring, lock collar,
and top backup ring.
Step 7
Install snap ring.
Step 1
Place hub and friction discs into
the housing.
the housing.
2-Plate Assembly