iOptron 8200 Manual Do Utilizador
iOptron Corp. | 6F Gill Street | Woburn, MA 01801 USA | (781) 935‐2800 | Toll Free (866) 399‐4587 | www.iOptron.com
Quick Set‐up
Note: This is a brief outline for getting started. Please refer to the full manual at www.iOptron.com for
details.
Note: This is a brief outline for getting started. Please refer to the full manual at www.iOptron.com for
details.
Step 1.
Extend tripod legs to full extension.
Extend tripod legs to full extension.
Step 2.
Attach mount to tripod using the long bolt (#7). Slide
tray on bottom of shaft. Then screw on round black
knob (#9).
Attach mount to tripod using the long bolt (#7). Slide
tray on bottom of shaft. Then screw on round black
knob (#9).
Step 3.
Attach telescope to mount using dovetail lock (#2).
Attach telescope to mount using dovetail lock (#2).
Step 4.
Set telescope to PARK POSITION. (1) Position the
mount so that the “S” is facing south. (2) The telescope
tube should be pointed directly up at the zenith. If it is
not perfectly straight then loosen the altitude lock (#4)
to adjust telescope.
Set telescope to PARK POSITION. (1) Position the
mount so that the “S” is facing south. (2) The telescope
tube should be pointed directly up at the zenith. If it is
not perfectly straight then loosen the altitude lock (#4)
to adjust telescope.
Step 5.
Level the mount using the bubble on side of mount by
adjusting tripod legs. It is also suggested to use
additional levels to assure very precise level.
Level the mount using the bubble on side of mount by
adjusting tripod legs. It is also suggested to use
additional levels to assure very precise level.
1)South
2) Up