Interlink electronic VersaPoint RF Wireless Keyboard Manual Do Utilizador

USERS GUIDE

VERSAPOINT RF WIRELESS KEYBOARD

IBM PC compatible computer

USB port available

Microsoft Windows 98 or higher

1. Turn the keyboard over onto its face.

2. By pressing the latch tab toward the center of the

keyboard, pry open the battery door with your

fingers.

3. Insert 4 AA alkaline batteries (included) with the

positive (+) and negative (-) orientation as shown

inside the compartment (negative is at the flat

end of the battery and goes toward the spring).

4. Replace the battery door by ensuring both

retaining tabs fit into their slots and the latch tab

snaps into place.

1. Shut down Windows and turn off your computer.

2. Locate an enabled USB port on the back of your

computer.

3. Plug the connector on the end of the receiver

cable into the USB port on your computer.

4. Start Windows and follow the on-screen instruc-

tions to enable/install the Windows drivers for

the USB. keyboard and mouse as needed.

Getting Started

System

Requirements

Installing the

Keyboard

Batteries

Connecting

the Receiver

ppendix A

Specifications

Model Number

VP6210

Technology:

Omnidirectional RF

Number of Keys:

88 (equal to 104 when

combined with the Fn Key)

Carrier Frequency:

916 MHz

Effective Operating Range: Up to 100 feet

(30 meters) typical

Battery Life:

Up to 6 months typical

Power:

4 - AA alkaline batteries

6VDC (included)

Temperature:

Operating: 32°F to 122°F

(0°C to 50°C)

Storage: -4°F to 158°F

(-20°C to 70°C)

Keyboard dimensions: 15.3 x 7.0 x 1.7
Keyboard weight:

1 lb., 8 oz.

Receiver dimensions: 3.0 x 3.5 x 1.0
Antenna:

3.9 articulating

Receiver connector:

USB