Intex Recreation 638 Manual Do Utilizador

(106)  MODEL 638 FILTER PUMP  ENGLISH  7.5” X 10.5” PANTONE 295U  01/29/2007

Make sure filter pump is not operating. Disconnect line cord.

To prevent water from escaping the pool, unscrew the strainer grids from the 

strainer connectors and insert the hat-like plugs into the strainer connectors.

In a counter-clockwise motion, remove threaded cover (3) and cover seal (4).

Be careful not to lose the cover seal (4).

Remove filter cartridge (5) to clean it. The filter may be cleaned from the spray 

from a water hose.

Use judgement as to whether cartridge needs to be replaced.

Return cartridge to filtering position.

Return the seal (4) and threaded cover (3) to their original positions. Tighten 

the threaded cover (3) by hand only, twisting it in a clock-wise direction.

After service, open the air release valve, remove the plugs, allow any air to 

escape through the valve before tightening the valve again and replace the 

strainer grids. The pump is now primed with water again and may be turned on.