Infortrend EONSTOR A16E-G2130-4 Manual Do Utilizador

EonStor A16E-G2130-4 Installation and Hardware Reference Manual  

The two (2) power cables shipped with the subsystem must be plugged into 

the power cord sockets in the rear of the PSU modules. The plug at the other 

end of the power cable must be inserted into a socket on the UPS. (See 

Figure D-2) Please refer to the UPS manual to determine the location of 

these sockets. The UPS must then be connected to main power. 

The default baud rate for the COM 2 serial port is 38400 and must be 

changed to 2400. For instructions on changing the baud rate, please refer to 

the  SCSI to SATA RAID Subsystem’s Operation Manual that came with 

the subsystem. 

The separately purchased audio-jack to DB9 serial cable connects the 

COM2 port on the controller module to the UPS directly. (See Figure D-2) 

The cable transmits UPS status updates to the controller module and will in 

turn determine the write policy of the controller module. To connect the 

serial communication cable to the subsystem controller, insert the audio jack 

connector on one end of the cable into the COM2 port on the controller 

module. To see how to connect the DB9 connector to the UPS, please refer 

to the documentation that came with your UPS. 

 

 

D-2  

Connecting the UPS to the Subsystem