IBM P96 Manual Do Utilizador

2

This monitor can be adjusted within the angles shown
below. To find the center of the monitor’s turning radius,
align the center of the monitor’s screen with the centering
dots on the stand.
Hold the monitor at the bottom with both hands when you
turn it horizontally or vertically. Be careful not to pinch
your fingers at the back of the monitor when you tilt the
monitor up vertically.

Do not remove the tilt-swivel base from the monitor.

• Use an appropriate power cord for your local power

supply.

• Before disconnecting the power cord, wait at least 30

seconds after turning off the power to allow the static
electricity on the CRT display surface to discharge.

• After the power has been turned on, the CRT is

demagnetized (degaussed) for about 5 seconds. This
generates a strong magnetic field around the metal frame,
which may affect the data stored on magnetic tapes and
disks near the bezel. Place magnetic recording equipment,
tapes, and disks away from this monitor.

The equipment should be installed near an easily
accessible electrical outlet.

• Prevent internal heat build-up by allowing adequate air

circulation. Do not place the monitor on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.

• Do not install the monitor near heat sources such as

radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration, or shock.

• Do not place the monitor near equipment which generates

magnetism, such as a transformer or high voltage power
lines.

• Clean the cabinet, panel and controls with a soft cloth

lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.

• Do not rub, touch, or tap the surface of the screen with

sharp or abrasive items such as a ballpoint pen or
screwdriver. This type of contact may result in a scratched
picture tube.

• Clean the screen with a soft cloth. If you use a glass

cleaning liquid, do not use any type of cleaner containing
an anti-static solution or similar additive as this may
scratch the screen’s coating.

When you transport this monitor for repair or shipment, use
the original carton and packing materials.

°

°

°

°