IBM PowerLook 2100XL Manual Do Utilizador

 

This chapter describes how you can use your scanner with your Macintosh computer. 
 

 

 

Before you can use your scanner with your computer, you need to install the interface card into 
your Computer. 
 
To install the card into one of the computer’s expansion slots, observe the following procedures: 
 
Note:  The interface card is sensitive to static electricity.  Handle the card by its mounting bracket, 

particularly when removing the card from its anti-static packaging. 

 
1.  Turn the computer power off and unplug the power cord. 

 

2.  Remove the housing cover of the computer.  Follow the instructions provided in your 

Computer’s reference manual. 

 

3.  Remove the metal cover corresponding to your chosen slot.  Keep the removed screw so that 

it can be used to fasten the interface card. 

 

4.  Gently insert the interface card into the slot until it is firmly seated in the slot. 

 

 

 
5.  Secure the card in place with the screw removed from the expansion slot cover in step 3 

above. 

 

6.  Replace the housing cover following the instructions provided in the computer’s reference 

manual. 

 

 

1.  Ensure that the scanner’s SCSI ID is properly set.  Refer to the “Changing the SCSI ID 

Number” section in Chapter 1 for instructions on setting the scanner’s SCSI ID. 

 

2.  Turn on Active terminator and termination power (please refer to Appendix A for more 

details on setting termination), connect the SCSI cable to SCSI port and connect the other end 
of he SCSI cable to the scanner. 

 

 

10