IBM RS/6000 7043 43P Manual Do Utilizador
Chapter 5. Using the Online and Standalone Diagnostics
Sources for the Diagnostics
The diagnostics consist of Standalone Diagnostics and Online Diagnostics.
Standalone Diagnostics are packaged on removable media and can be run
regardless of the operating system installed on the system unit. They must be
booted or mounted before they can be run. If booted, they have no access to the AIX
Error Log or the AIX Configuration Data (if AIX is installed). However, if mounted,
they have access to the AIX Error Log and the AIX Configuration Data (if AIX is
installed).
Standalone Diagnostics are packaged on removable media and can be run
regardless of the operating system installed on the system unit. They must be
booted or mounted before they can be run. If booted, they have no access to the AIX
Error Log or the AIX Configuration Data (if AIX is installed). However, if mounted,
they have access to the AIX Error Log and the AIX Configuration Data (if AIX is
installed).
Online Diagnostics can be used only when AIX is installed on the the system unit.
Online diagnostics reside with AIX in the file system. They can be booted in single
user mode (referred to as service mode), run in maintenance mode (referred to as
maintenance mode), or run concurrently (referred to as concurrent mode) with other
applications. They have access to the AIX Error Log and the AIX Configuration
Data.
Online diagnostics reside with AIX in the file system. They can be booted in single
user mode (referred to as service mode), run in maintenance mode (referred to as
maintenance mode), or run concurrently (referred to as concurrent mode) with other
applications. They have access to the AIX Error Log and the AIX Configuration
Data.
Standalone and Online Diagnostics Operating Considerations
The following items identify some things to consider before using the diagnostics.
1. Online diagnostic support is optionally installed with the AIX operating system
and therefore may not be installed on some systems. When diagnostics are
installed, the device support for some devices may not get installed. If this is the
case, that device does not appear in the diagnostic test list when running disk
based diagnostics.
installed, the device support for some devices may not get installed. If this is the
case, that device does not appear in the diagnostic test list when running disk
based diagnostics.
2. Support for some TTY terminals is optionally installed. If you attach a TTY
terminal to a system to run diagnostics be aware that it may not work properly
since the AIX support for the terminal may not be installed.
since the AIX support for the terminal may not be installed.
Selecting a Console Display
When you run Standalone Diagnostics and under some conditions Online
Diagnostics, you need to select the console display. The diagnostics display
instructions on any graphics display and the terminal attached to the Serial 1 port.
Diagnostics, you need to select the console display. The diagnostics display
instructions on any graphics display and the terminal attached to the Serial 1 port.
Identifying the Terminal Type to Diagnostics
Note: This is not the same as selecting a console display.
When you run diagnostics, the diagnostics must know what type of terminal you are
using. If the terminal type is not known when the FUNCTION SELECTION menu is
using. If the terminal type is not known when the FUNCTION SELECTION menu is
Copyright IBM Corp. 1996, 1998
5-1