ICP DAS USA IM-100 Manual Do Utilizador

z 

IM-30/IM-100 offers 2 input ports; designated as Input Port 0 

nd Input Port 1.    Both ports are TTL level. The input ports are accessed 

 typical circuit that you can use to input a 

The MAVIS 

a

via the 10-pin circular connectors on the back of the camera. Please refer 

Table 2-1 for input port pin assignments. 

For each port, an input voltage between 0.0 and 1.5VDC indicates a logical 

0. An input voltage between 3.5 and 5.0 VDC indicates a logical 1. Typical 

current draw for the input port is 1mA.   

Figure 1-6 is an example of a

signal into the MAVIS IM-30/IM-100 cameras. 

 

By default, Input Port 0 is assigned to receive an external trigger (Ex-Trig) 

signal that can be used to control the start of exposure. Also you can 

change the Ex-Trig signal to Input Port 1 and please refer “5.6 External 

Trigger” for detail information. 

z 

The MAVIS IM-30/IM-100 offers 4 output ports; designated as Output Port 0, 

Output Port 1, Output Port 2 and Output Port 3, all are TTL level. The 

output ports are accessed via the 10-pin circular connectors on the back of 

the camera. Please refer Table 2-1 for input port pin assignments. 

For each port, an output voltage between 0.0 and 0.44VDC indicates a 

logical 0. The maximum low level output voltage (i.e., 0.44VDC) will be 

present when the driver is sinking the maximum allowed input current of 

 - 

13 

-