HP XC System Software 3.2.1 Manual Do Utilizador
Figure 1-4 HP BladeSystem c7000 Enclosure Bay Locations (Rear View)
8
Interconnect Bay #7
1
Fan Bays
2
Interconnect Bay #1
9
Interconnect Bay #8
10
Onboard Administrator Bay 1
3
Interconnect Bay #2
4
Interconnect Bay #3
11
Onboard Administrator Bay 2
12
Power Supply Exhaust Vent
5
Interconnect Bay #4
6
Interconnect Bay #5
13
AC Power Connections
7
Interconnect Bay #6
1
Onboard Administrator/Integrated Lights Out port
2
Serial connector
3
Enclosure Downlink port
4
Enclosure Uplink port
General Configuration Guidelines
The following are general guidelines for configuring HP BladeSystem c7000 enclosures:
•
Up to four enclosures can be mounted in an HP 42U Infrastructure Rack.
•
If an enclosure is not fully populated with fans and power supplies, see the positioning
guidelines in the HP BladeSystem c7000 enclosure documentation.
guidelines in the HP BladeSystem c7000 enclosure documentation.
•
Enclosures are cabled together using their uplink and downlink ports.
•
The top uplink port in each rack is used as a service port to attach a laptop or other device
for initial configuration or subsequent debugging.
for initial configuration or subsequent debugging.
24
Hardware and Network Overview