HP XC System Software 3.2.1 Manual Do Utilizador
Figure 3-8 ProCurve 2610-48 Root Console Switch
The callouts in the figure enumerate the following:
1.
Port 42 must be reserved for an optional connection to the console port on the head node.
2.
Port 49 is reserved.
3.
Port 50 is the Gigabit Ethernet link to the Root Administration Switch.
Allocate the ports on this switch for consistency with the administration switches, as follows:
•
Ports 1–10, 13–22, 25–34, 37–41
— Starting with port 1, the ports are used for links from Branch Console Switches. Trunking
— Starting with port 1, the ports are used for links from Branch Console Switches. Trunking
is not used.
— Starting with port 41 and in descending order, ports are assigned for use by individual
nodes in the utility cabinet. Nodes in the utility cabinet are connected directly to the
Root Administration Switch.
Root Administration Switch.
NOTE:
There must be at least one idle port in this set to indicate the dividing line
between branch links and root node administration ports.
•
Ports 11, 12, 23, 24, 35, 36, and 43–48 are unused.
3.3.6.3 ProCurve 2626 Switch
You can use a ProCurve 2626 switch as a Root Console Switch for the console branch of the
administration network. The ProCurve 2626 switch is shown in
administration network. The ProCurve 2626 switch is shown in
. In the figure, white
ports should not have connections, black ports can have connections, and ports with numbered
callouts are used for specific purposes, described after the figure.
callouts are used for specific purposes, described after the figure.
Figure 3-9 ProCurve 2626 Root Console Switch
Power
Faul t
hp procurve
switch 2626
J4900A
switch 2626
J4900A
Lnk
Ac t
Ac t
FDx
Spd
Fan
Status
Self
Te st
Te st
Reset
Clear
LED
Mode
off = 10Mbps
Spd Mode
flash = 100Mbps
on = 1000Mbps
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
T
25
M
T
26
M
Use only one (T or M) for Gigabit port
Gig-T
Ports
Ports
Mini-
GBIC
Ports
Connections to Node Console Ports
Start at port 21 (Descending)
Start at port 21 (Descending)
10/100Base-TX RJ-45 Ports
Gigabit
Ethernet
Ports
Ethernet
Ports
Uplinks from Branches
Start at port 1 (Ascending)
Start at port 1 (Ascending)
The callouts in the figure enumerate the following:
1.
Port 22 must be reserved for an optional connection to the console port on the head node.
2.
Port 25 is reserved.
3.
Port 26 is the Gigabit Ethernet link to the Root Administration Switch.
Allocate the ports on this switch for consistency with the administration switches, as follows:
•
Ports 1–10, 13–21
3.3 Switches
53