HP RC3000 Manual Do Utilizador

 125  

3.3.2.8 MOVETO 

The MOVETO mode is intended to provide an easy way to move the antenna to a certain position for 
doing testing such as cutting antenna patterns.  This mode is also useful for tuning up automatic 
movements. 

 

AZIM:-123.4 ( 123.4)              MOVETO 

ELEV:  41.5 (  41.5)  <5>SENSOR:PRIMARY 

 POL: -13.3 ( -13.3)  <3>SPEED:FAST 

SET <1>AZ <2>EL<6>POL <4>START MOVE 

 

The current azimuth, elevation and polarization angles are displayed.  When the mode is first entered, the 
current positions are shown as the target positions.  After setting target positions and setting the desired 
speed, the automatic movement may be initiated by pressing the 4 key. 

 

The state of this field when this mode is entered will be “PRIMARY”.  This means that the displayed 
angles and entered targets are generated and referenced to the axis sensor that generates angles.  For 
instance, the typical primary elevation sensor is the electronic inclinometer. 

If the mount is equipped with higher resolution sensors such as resolvers or pulse sensors, toggling the 
field to “SECONDARY” will cause the display and target to change to an integer representative of the 
high resolution sensor.  This mode of operation allows actions such as the small movements made during 
inclined orbit tracking to be simulated.