HP 288048 Manual Do Utilizador
Installation
311053C
7
Mount Gun
Reciprocating Arm Rod Mount
Manifolds 241161 and 241162
To mount the gun on a reciprocating arm rod [0.5 in. (13
mm) diameter maximum]:
mm) diameter maximum]:
1.
Insert the mounting bar (A) through the hole in the
manifold as shown in F
manifold as shown in F
2.
Secure the gun to the bar by tightening the mount-
ing screw (B).
ing screw (B).
3.
Ensure the tip of the gun is 8 to 10 in. (150 to 200
mm) from the surface of the object being sprayed.
mm) from the surface of the object being sprayed.
Stationary Support Mount
All Manifolds
To mount the gun on a stationary support (refer to F
1.
Attach the gun to the support with two M5 x 0.8 cap-
screws (C). The screws must be long enough to
engage the threaded holes in the gun manifold to a
depth of 1/4 in. (6 mm).
screws (C). The screws must be long enough to
engage the threaded holes in the gun manifold to a
depth of 1/4 in. (6 mm).
2.
Ensure the tip of the gun is 8 to 10 in. (150 to 200
mm) from the surface of the object being sprayed.
mm) from the surface of the object being sprayed.
Use the 1/8 in. alignment pin (P) to assist in
orienting the gun.
orienting the gun.
F
IG
. 3: Reciprocating Arm Mount
TI8111a
A
B
P
F
IG
. 4: Stationary Support Mount
C
TI8112a