Home Automation 68A00-1 Manual Do Utilizador
Tilt Speed
Enter the speed for the dome to move up and down. This range may vary from
device to device.
device to device.
Halt Speed
Enter the delay time before the dome reverses direction when auto-panning. This
range may vary from device to device.
range may vary from device to device.
* Auto Pan/Preset Settings
Auto Pan
To set the start and end points for auto-panning, move the camera to the start point
of the sweep, select Point 0 from the drop-down list, and click the Set button. Next,
go to the end point, select Point 1 from the drop-down list, and click the Set button.
Click the Run/Stop button to confirm the auto-pan end points operate as desired.
of the sweep, select Point 0 from the drop-down list, and click the Set button. Next,
go to the end point, select Point 1 from the drop-down list, and click the Set button.
Click the Run/Stop button to confirm the auto-pan end points operate as desired.
Preset
To define each preset, choose a preset number from the drop-down list, use the
PTZ control buttons in this window to move the camera to the desired location,
adjust zoom and focus, and click the Set button. Note that the preset function is
supported only if the PTZ camera supports the preset function. Please refer to
PTZ camera manufacturer’s instruction manual for detailed information.
PTZ control buttons in this window to move the camera to the desired location,
adjust zoom and focus, and click the Set button. Note that the preset function is
supported only if the PTZ camera supports the preset function. Please refer to
PTZ camera manufacturer’s instruction manual for detailed information.
47
68A00-1 NETWORK DIGITAL VIDEO RECORDER