Honeywell VCR DCP200 Manual Do Utilizador
DCP200 Profile Controller & Recorder - Product Manual
Page 166
PC Software
51-52-25-150, Issue 1 – April 2009
Instrument Configuration
When creating a new configuration with the
software, the basic instrument type and the
options to be fitted to it must be defined in the
Device Selection screen. You can select these
from the drop down lists or by typing the full
model number in the Order number field.
software, the basic instrument type and the
options to be fitted to it must be defined in the
Device Selection screen. You can select these
from the drop down lists or by typing the full
model number in the Order number field.
Note:
It is important that the options selected match
those fitted to your unit.
It is important that the options selected match
those fitted to your unit.
Alternatively the complete instrument type and existing configuration can be uploaded to the
PC from your instrument, via the configuration socket or serial communications module. A
PC from your instrument, via the configuration socket or serial communications module. A
previously saved configuration file can also be opened from the file open menu or button.
Once the required changes have been made, the configuration can then be download to the
instrument or saved to disk with a .bct file extension. The configuration file contains the
device information and configuration parameter settings, including any supervisor and
enhanced operation mode screens and changes to the LED functions. Profiles, splash
screens and language files are not saved in the .bct file. They are uploaded/saved
separately.
instrument or saved to disk with a .bct file extension. The configuration file contains the
device information and configuration parameter settings, including any supervisor and
enhanced operation mode screens and changes to the LED functions. Profiles, splash
screens and language files are not saved in the .bct file. They are uploaded/saved
separately.
A hard copy of the instrument configuration and terminal wiring can be printed from the File |
Print menu.
Print menu.
Parameter configuration
The main parameter screen contains all of the instrument settings broken down into
functional groups. The parameters can be changed in the yellow Value column. Type in a
new value or select from the list offered, as appropriate. The possible value range is show to
the left. If an invalid value is entered, it will be highlighted in red. Parameters are “greyed out”
if the are currently inaccessible due the hardware not being fitted or if they are disabled by
other settings.
functional groups. The parameters can be changed in the yellow Value column. Type in a
new value or select from the list offered, as appropriate. The possible value range is show to
the left. If an invalid value is entered, it will be highlighted in red. Parameters are “greyed out”
if the are currently inaccessible due the hardware not being fitted or if they are disabled by
other settings.
Configuring Supervisor Mode
Users can access to a lock code protected sub-set of the configuration parameters that have
been defined from the software. Up to 50 of the parameters can be copied into this mode. To
define these screens, first select Supervisor Mode from the mode drop-down list.
been defined from the software. Up to 50 of the parameters can be copied into this mode. To
define these screens, first select Supervisor Mode from the mode drop-down list.
Select the functional group containing the parameter to be added. Highlight the parameter
Name and click the Add Entry button. The Move Entry Up and Down buttons are used to
change the order which the parameters will appear in Supervisor Mode. Unwanted entries
can be highlighted and deleted with the Remove Entry button.
Name and click the Add Entry button. The Move Entry Up and Down buttons are used to
change the order which the parameters will appear in Supervisor Mode. Unwanted entries
can be highlighted and deleted with the Remove Entry button.
Configuring Enhanced Operator Mode
Users can access sub-set of the configuration parameters at the end of the normal Operation
Mode screen sequence, that have been defined from the software. Up to 50 parameters can
be copied in a similar manner to the Supervisor Mode selection by selecting Enhanced
Operation Mode from the mode drop-down list. Note: Any parameters copied into the
Enhanced Operation mode are not password protected.
Mode screen sequence, that have been defined from the software. Up to 50 parameters can
be copied in a similar manner to the Supervisor Mode selection by selecting Enhanced
Operation Mode from the mode drop-down list. Note: Any parameters copied into the
Enhanced Operation mode are not password protected.