Holux GPSmile Pocket PC Manual Do Utilizador

 

 

 
 
 

The battery switch connects and disconnects the battery power from Holux GPSmile 
60. The original factory setting of the switch is set to the right position (the “stop” 
side). When using Holux GPSmile 60 for the first time, you need to set the battery 
switch to the left position (the “supply” side). 

 

 

Switching the battery switch to the “stop” position at any 
time leads to loss of data. 

 

1.  Use the stylus to slide the battery lock to the up position (the “lock” side)  

See “To install the battery“ later in this chapter. 

. 

                                             

 

 

 

When the preset alarm time (set through Calendar or 
Tasks) goes off, the indicator starts flashing. 

Indicates charging of the battery. 

Indicates full charge of the battery. 

The ambient temperature is too high or too low and 
battery charging will stop. 

 

Using the Stylus 

Battery Lock

Lock

 

 

 

Unlock