Hitachi 3300MFP Manual Do Utilizador
EN
Installing a new ADF 131
Installing a new ADF
If your HP LaserJet 3300 came without an ADF, you can upgrade it by adding one. The ADF
replaces your current lid, includes a 50-page input tray, and installation takes only a few seconds.
Adding the ADF will save you time and effort when making copies of multiple page documents. If
you are experiencing abnormal media jams in your current ADF, you may need to replace it. See
replaces your current lid, includes a 50-page input tray, and installation takes only a few seconds.
Adding the ADF will save you time and effort when making copies of multiple page documents. If
you are experiencing abnormal media jams in your current ADF, you may need to replace it. See
for information on ordering a replacement ADF.
To install a new or replacement ADF
1
Remove the flatbed scanner lid by opening it and gently lifting
straight up.
straight up.
Note
If you are replacing an existing ADF, you must first pull up both hinge
tabs before lifting the ADF up out of the product.
tabs before lifting the ADF up out of the product.
2
On the new ADF, unfold the hinges and pull up the tab on each
hinge.
hinge.
3
Install the new ADF by inserting the hinges straight down into the
product.
product.
4
Push down both tabs until they click.
1
2
3
4