Hitachi DV-RX7000E Manual Do Utilizador

32 - English

1. PCM:

Select this when you have no equipment
that can decode Dolby Digital (or MPEG-
2) signal.
When you play Dolby Digital (or MPEG-2)
sound track, the digital output are
converted to PCM Stereo.

2. Bitstream: Output Dolby Digital (or MPEG-2) audio

as bitstream. Select this when your AV
receiver or AV amplifier have Dolby
Digital (or MPEG-2) Decoder.

■ Digital output setting is equally applied to both

Dolby Digital and MPEG-2 audio. LPCM sound
track is always outputted as PCM. It has no rela-
tion with Digital Output setting.

■ Be sure to select the correct Digital Output or you

will hear no sound or big noise.

1. Off: Doesn’t output DTS signal.

Select this when your AV receiver or AV
amplifier does not have DTS decoder.

2. On: Outputs DTS Bitstream via digital output when

you play DTS track.
Select this only when your AV receiver (or AV
amplifier) have DTS decoder.

■ When DTS soundtrack is played, sound is not

output from Analog Audio Output.

Dynamic Range Compression : This is only active
when a Dolby Digital signal is detected.
- On:

When the Movie-soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.

- Off:

You can enjoy the movie with standard
Dynamic Range.

This function allows you to setup the TV screen
settings.

Select “Setup” using 34 buttons, then
press the 1 or OK button.

Select “Video” using 34 buttons, then
press the 1 or OK button. Video setup
menu will be displayed.

Use 34 buttons to select the desired
sub menu and press the OK or 1
button.

Use the 34 buttons to select the
desired item. Then press the 1 or OK
button.

■ Press the RETURN or 2 button to return to the

previous menu. Press the MENU button to exit
the menu.