Hitachi DZ-GX5000A Manual Do Utilizador

English

Use the provided PC connection cable to connect the DVD video camera/recorder to PC as shown 
below.

• The PC connection cable does not supply power to the DVD video camera/recorder: Use the AC adapter/charger 

to power the DVD video camera/recorder.

• Before connecting the DVD video camera/recorder to PC, disconnect any cables or camera accessories (external 

video flash, external microphone, etc.) other than the PC connection cable and AC adapter/charger.

• When connecting the DVD video camera/recorder to PC, the ACCESS/PC indicator will light green. While a disc 

is being accessed, the indicator will light or blink orange. While an SD memory card is being accessed, the CARD 
ACCESS indicator will light or blink red.

• When this DVD video camera/recorder is connected to PC, nothing will appear on the LCD monitor or in the 

viewfinder.

• When using Windows, the DVD video camera/recorder can be connected to a USB1.1 port of PC. However, since 

the data transfer speed is lower than when connecting to a USB2.0 port, lost frames may occur or the process 
may take more time.

• Read “Cautions when connecting DVD video camera/recorder to PC” on page 127.

The power switch of this DVD video camera/recorder has two modes: Disc mode when it is set to 
“O” or “N

”

”, and Card mode when it is set to “P”.

If you connect the DVD video camera/recorder to PC via PC connection cable, the PC will 
automatically recognize the DVD video camera/recorder. After recognition is finished, it may be 
prompted to restart the PC: In this case, follow the instruction and restart the PC.

To PC connection 
terminal

PC connection cable (provided)

To USB connection 
terminal