Hitachi DZ-GX5000A Manual Do Utilizador

English

While holding down the gray button at the right 
of power switch, set the switch according to 
each recording function:

Power ON status

During playback, set the power switch to “O” 
or “N” when using disc, or set it to “P” when 
using card.

• Once you turn the DVD video camera/recorder on to 

let it recognize the disc, you can immediately record 
or play back by turning the DVD video camera/
recorder on again. However, if a long time has 
elapsed after the disc was inserted, it will take some 
time for the DVD video camera/recorder to start 
because it must recognize the disc again (see 
“Troubleshooting” on page 135).

• It will take some time for the DVD video camera/

recorder to display the Disc Navigation screen after 
power is turned on.

• When the DVD video camera/recorder is turned on, 

the self-diagnosis function will work and a message 
may appear. In this case, refer to “Trouble Messages” 
on page 129 and take corrective action.

The DVD video camera/
recorder will turn off

Set to “P”:

To record still on SD 
memory card

Set to “O”:

To record movie on DVD-
RAM/DVD-RW/DVD-R/
+RW disc

Set to “N”:

To record still on DVD-
RAM disc

Power switch

Turn the switch while 
holding down the gray 
button at the right of switch.