Graco 332235A - Direct Immersion Kit 16U764 for 2570ES Manual Do Utilizador
332235A
7
Using Direct Immersion
1.
Apply pipe thread sealant 119400 over male
threads on pump.
threads on pump.
2.
Apply pipe sealant to bushing (34).
3.
Position 55-gallon drum under pump assembly.
4.
Unclamp and tilt tower/bracket back to 1st position.
5.
Lock clamp into 1st position.
6.
Install strainer (23) to bottom of intake tube (24).
MOVING PARTS HAZARD
Moving parts can pinch or amputate fingers and other
body parts.
body parts.
• Keep clear of moving parts.
• Do not operate equipment with protective guards
or covers removed.
• Pressurized equipment can start without warning.
Before checking, moving, or servicing equipment,
follow the Pressure Relief Procedure in this
manual. Disconnect power or air supply.
follow the Pressure Relief Procedure in this
manual. Disconnect power or air supply.
34
ti21170a
pump
assembly
assembly
drum
55-gallon
ti21169a
clamp
ti21181a
1st position
23
24
ti7646a