Goodmans GCR1880DAB Manual Do Utilizador

Press the 

 2 

AlARMS button again to 

set alarm 2.
Press the 

 3 

AlARMS Button one 

more time, and the relevant alarm 

icon will flash.

Using ‘set alarm 1’ as an example, 

when your radio says ‘Alarm 1 Setup’

Press the 

 1 

SElECT Button. Your 

radio will run the ‘Alarm 1 Wizard’. 
Follow your radio’s instructions to 

 2 

configure the following parameters:

Alarm state
Sets the alarm On or Off.

Press the 

 1 

< or > Button to ‘On’ to 

turn the alarm on.
Press the 

 2 

SElECT Button to 

confirm.

If ‘Off’ is selected, the alarm will be 

turned off immediately and you will exit 

the alarm settings.

DON’T FORGET! To turn the alarm 

off while the alarm is sounding, 

press the STANDBY button.

Refer to the steps 1-2 in “Alarm State”.
When the On/Off options appear for 

Alarm state:

Press the 

 1 

< or > Button to select 

‘Off’.
Press the 

 2 

SElECT Button to 

confirm,

‘Alarm Saved’ will be displayed and the 

alarm will be cancelled.

Alarm On time
This is the time the alarm will start to 

sound. 

Modify the alarm time using the  

 1 

< or > Buttons.
Press the 

 2 

SElECT Button to 

confirm the alarm time.

Alarm Duration time
This is the length of time the alarm will 

sound for.
The alarm sounding duration time can 

be  selected from: 15/30/45/60 and 90 

minutes.

Modify the duration using the 

 1 

< or 

> Buttons
Press the 

 2 

SElECT Button to 

confirm the setting.

Alarm Source
The alarm can be set to be the internal 

buzzer, the DAB Radio or the FM Radio. 

Press the 

 1 

< or > Buttons to select 

the alarm source.
Press the 

 2 

SElECT Button to 

confirm the selection.

Alarm Frequency
The Alarm can be set to operate: Daily, 

Once, Weekends or Weekdays. 

Press the 

 1 

< or > Buttons to select 

the required alarm frequency.
Press the 

 2 

SElECT Button to 

confirm the selection.