Generac Power Systems ZUMO 665 Manual Do Utilizador

Appendix

Your zūmo must acquire GPS (Global 

Positioning System) satellite signals to 

navigate. If you are indoors, near tall 

buildings or trees, or in a parking garage, 

your zūmo cannot acquire satellites. Go 

outside to an area free from tall obstructions 

to use your zūmo. 
When your zūmo has acquired satellite 

signals, the signal strength bars on the Menu 

page are green 

. When it loses satellite 

signals, the bars turn red or clear 

. 

For more information about GPS, go to 

The permanent mounting adhesive is 

extremely difficult to remove after it is 

installed.
Use the enclosed mounting disk to mount 

your unit to the dashboard and comply with 

certain state regulations. 

1.  Clean and dry the dashboard where you 

are placing the disk.

2.  Remove the backing from the adhesive 

on the bottom of the disk.

3.  Place the disk on the dashboard.
4.  Remove the clear plastic cover from the 

top of the disk.

5.  Place the suction cup mount on top of 

the disk. Flip the lever down (toward the 

disk).

To remove the zūmo from the cradle on both 

the suction cup and motorcycle mounts, 

press the button on the side of the cradle, and 

tilt the zūmo forward. Place the weather cap 

on the motorcycle mount cradle.
To remove the cradle from the suction cup 

mount, turn the cradle to the right or the left. 

Apply pressure until the socket on the cradle 

releases the ball on the mount. 
NOTE: Reconnecting the cradle to the 

suction cup mount requires significant force. 

Press the ball end firmly into the socket.
To remove the suction cup mount from the 

windshield, flip the lever toward you. Pull 

the tab on the suction cup toward you.