Generac Power Systems ZUMO 665 Manual Do Utilizador

Getting Started

1.  With the zūmo placed in the cradle, plug 

the GXM 40 antenna into the mini‑USB 

port on the back of the automotive mount.

2.  Place the GXM 40 antenna within clear 

view of the sky. 



Incorrectly wiring the power cable with 

bare wire leads can result in damage to the 

vehicle or the battery and can cause bodily 

injury. Garmin strongly recommends having 

an experienced installer with the proper 

knowledge of electrical systems install the 

unit.
See the Important Safety and Product 

Information guide in the product box for 

product warnings and other important 

information.
Do not use the suction cup mount on a 

motorcycle. 

Select a suitable and secure location to 

mount the zūmo on your motorcycle based 

on available power sources and safe cable 

routing.

The recommended torque is 50 lbf-in. Do not 

exceed torque of 80 lbf-in.
The zūmo includes parts for two handlebar 

installation solutions. Custom mounts can 

require additional hardware (

www.ram 

1.  Place the U‑bolt around the handlebar, 

and thread the ends through the 

handlebar base.