Everpure 2001 Manual Do Utilizador
SUPREMA 2001 - OPERATION & SERVICE MANUAL
Page 40 of 60
July 6, 2001
Suprema 2001 - Operation & Service
MESSAGE
POSSIBLE CAUSE
CORRECTIVE ACTION
ENTER SET-UP
SET TEMPERATURE
The rear board is set for a mechanical
thermostat, but the machine is
equipped with an electronic
temperature probe.
thermostat, but the machine is
equipped with an electronic
temperature probe.
(
Go to the “
SET TEMPERATURE
” menu and
set the electronic temperature probe.
INCOMPATIBLE
SOFTWARE LEVEL
The software version (EPROM) in the
Data Link downloader in not compatible
with this equipment and will be
downloaded.
Data Link downloader in not compatible
with this equipment and will be
downloaded.
(
Replace the software version (EPROM)
with one that is compatible with the
Suprema model. The words “
Suprema model. The words “
SUPREMA
”
will be printed on the EPROM decal.
PLEASE CALL FOR
ROUTINE SERVICE
This message is a reminder that regular
maintenance may be due and will not
stop the operation of the coffee maker.
maintenance may be due and will not
stop the operation of the coffee maker.
(
The coffee maker is due for routine
maintenance.
(
To reset the message, enter the
"
SET
-
UP
"
and reset the service counter.
PLEASE CHECK
BREWER HARNESS
The brewer harness is not connected to
the rear board.
the rear board.
(
Connect the brewer harness to the rear
board.
PLEASE CHECK
OVERFLOW HARNESS
Overflow harness is not connected to
the rear board.
the rear board.
(
Connect the overflow harness to the rear
board.
PLEASE CHECK
TANK HARNESS
The water tank harness is not
connected to the rear board.
connected to the rear board.
(
Connect the water tank harness to the
rear board.
PLEASE CHECK
WATER SOURCE
Indicates a problem with the main water
supply not getting to the water tank.
supply not getting to the water tank.
(
At this point, the water tank is not full
and this message has to be reset. To
reset it, switch the power off and on.
reset it, switch the power off and on.
(
If the problem persists, check all
components on the water line (water
filter, tubing, fittings, etc.).
filter, tubing, fittings, etc.).
(
Check inlet valve to make certain it is
functioning properly.
(
In the case of a temporary disruption
with the water supply, the coffee maker
will reset itself after every hour.
will reset itself after every hour.
PRESS PRODUCT
TO RESET MESSAGE
The "
OPEN BREWER
" button has been
pressed.
(
Pressed the "
OPEN BREWER
" button once
more to close the brewer and exit.
(
At this point, pressing the appropriate
buttons on the front selection panel will
reset the product counters.
reset the product counters.
PROBES
CALL FOR SERVICE
The main level probes are covered with
lime/calcium.
lime/calcium.
(
The water tank may require deliming.
(
The main level probes need to be
cleaned/delimed.
SELECTION
NOT AVAILABLE
Product selected may be disabled.
(
Check the "
ENABLE SWITCHES
" menu to
see if product has been canceled.
(
Check the price of the selection to make
certain it has not been disabled (set
below zero).
below zero).