Ericsson STYLUS PRO 7700 Manual Do Utilizador

Your print has gaps or 
appears faint.

◗ Check the expiration date printed on each of the ink cartridges. If the 

cartridge is too old, replace it as described on page 157. 

◗ Make sure the Media Type setting in the printer software is correct.
◗ Run a nozzle check and cleaning cycle (see page 152). 
◗ Check the ink indicators and light and replace ink cartridges if your ink supply 

is low, as described on page 157. (If you replace ink cartridges with the 
printer turned off, the ink indicators will not be accurate.)

◗ The paper thickness setting is not correct for your paper. Use your printer 

software (page 119 for Mac OS X 10.6 & 10.5 or page 133 for Mac OS X 
10.4.11 or page 101 for Windows) to choose the correct setting. When 
you’re done printing with a custom paper configuration, be sure to return the 
setting to standard (STD). 

◗ The PLATEN GAP setting is too wide. Use the menu system to change the 

setting to STANDARD, or to NARROW if printing on very thin paper. See 
page 76 for instructions.

Your print appears blurry or 
smeared.

◗ Make sure the Media Type setting in the printer software is correct.
◗ If you’re printing on non-Epson media, you may need to adjust the paper 

thickness setting, drying time, or color density. Use your printer software 
(page 119 for Mac OS X 10.6 & 10.5 or page 133 for Mac OS X 10.4.11or 
page 101 for Windows) to choose the correct setting. When you’re done 
printing with a custom paper configuration, be sure to return the setting to 
standard (STD). 

◗ Your paper doesn’t meet the required specifications or wasn’t stored in a 

dry, humidity-free environment. Load new paper.

◗ If you’re using cut sheet media, make sure the printable side is face-up.
◗ Ink has leaked into the paper path. Wipe the paper path area of the printer 

with a soft, clean cloth. See page 168 for cleaning instructions.

◗ Turn off the High Speed setting. See page 108 for instructions.
◗ The PLATEN GAP setting is too narrow. Use the control panel to change the 

setting to WIDE or WIDER. See page 76 for instructions.

◗ Run a nozzle check and cleaning cycle (see page 152).
◗ You may need to uninstall and reinstall the printer driver (see page 193).
◗ If ink is smeared on the back of your print, make sure PAPER SIZE CHECK is 

ON in the control panel menu. This prevents printing beyond the edge of the 
paper and soiling the inside of the printer.