Ericsson SP4900DES Manual Do Utilizador

Prior to a print job, the printer automatically checks the nozzles and cleans 
them if necessary. You can specify how often you want this to happen or 
turn this feature off. You can also have a nozzle check pattern printed on a 
regular basis, so you can check it yourself.

1. Press r 

Menu

. 

PRINTER SETUP

 is selected. Press r again.

2. Press d until 

AUTO NOZZLE CHECK 

is selected, then press r.

3. Select one of the following, then press 

OK

:

•

ON: PERIODICALLY

—The printer periodically checks its nozzles 

and runs a cleaning cycle if necessary (default).

•

ON: EVERY JOB

—The printer automatically checks its nozzles 

and runs a cleaning cycle if necessary before each print job. This 
process uses a very small amount of ink (and no paper) and is 
recommended if you are running large print jobs unattended.

•

OFF

—The printer will not perform automatic nozzle checks and 

cleaning cycles.

4. Press 

l

, then select 

PRINT NOZZLE PATTERN 

and press r.

5. Select 

ON: EVERY PAGE

 to have the nozzle check pattern printed 

before each print job, or 

ON: EVERY 10 PAGES

 or

 OFF

. These settings 

take effect only when you print on roll paper.

6. Press 

OK

 to save the setting.

1. Make sure paper is loaded.

2. Press the 

 button to display the 

Ink Menu

.

3. Press d until 

NOZZLE CHECK 

is selected, then press r.