Ericsson Multi-Format Receiver RX1290 Manual Do Utilizador

Operating the Equipment Locally 

 

 

3 

Scroll to Menu 3.3.4 and edit the 
Audio 1 digital output format 
(AES3 or  AC-3) and output 
routing (STEREO, MIXED TO 
BOTH, LEFT TO BOTH, or 
RIGHT TO BOTH). Press Save. 

Edits the Audio 1 digital output format and 
output routing.  
Note that when the input signal is STEREO, 
the Audio digital output format will always be 
STEREO. 

4 

Scroll to Menu 3.3.5 and edit the 
clipping value (12 – 24 dB). 
Press Save. 

Edits the clipping value. 

5 

Scroll to Menu 3.3.6 and edit the 
AC-3 down mix parameter 
(SURROUND STEREO or 
CONVENTIONAL STEREO) 
Press Save. 

Edits the AC-3 down mix parameter. 

6 

Go to the Menu 3.4 for Audio 2, 
Menu 3.5 for Audio 3, Menu 3.6 
for Audio 4 and repeat steps 2 
through 5. 

Selects the audio component. 

These menu pages allow status monitoring and configuration of the low speed data. 

1 

Go to Menu 3.7 and press 
Edit. Select the data stream 
PID. 

Selects the data stream. 
 

2 

Scroll to Menu 3.7.1 and edit 
the low speed data output 
(ENABLED or DISABLED). 
Press Save. 

The unit receives and displays the correct bit-
rate. 
 

These menu pages allow status monitoring and configuration of the high speed data 
over Ethernet software option. 

1 

Go to Menu 3.8 and press 
Edit. Select the data stream 
PID. 

Selects the data user PID number. 
 

 

EN/LZT 790 0003/2 R1A

 

3-18