Epson EQUITY II+ Manual Do Utilizador

4. You can separate the sides of the cover from the bottom ledge of the

computer by pulling them outward slightly, as shown in Figure 4-3.

Figure 4-3. Remodeling the cover

5. When the back edge of the cover is a few inches away from the back

panel, you can lift the cover off. Set the cover aside.

Figure 4-4 shows the six option slots in the Equity II+. Slot 6 contains

the parallel and serial interface and floppy disk controller card. Be sure to

install the video card in slot 5.

Slots 1,5, and 6 are designed for 8-bit option cards and the other three-

slots 2 through 4-are designed for 16-bit option cards. Figure 4-5 shows
both types of cards. As you can see, the 16-bit card has a second connector.

4-3