Enviro Cara DR C-11500 Manual Do Utilizador

Initial Installation

(b) EXEMPTIONS: The following equipment is exempt from 248 CMR 5.08(2)(a)1 through 4:

1. The equipment listed in Chapter 10 entitled “Equipment Not Required To Be Vented” in the most

current edition of NFPA 54 as adopted by the Board; and

2. Product Approved side wall horizontally vented gas fueled equipment installed in a room or

structure separate from the dwelling, building or structure used in whole or in part for residential

purposes.

manufacturer of Product Approved side wall horizontally vented gas equipment provides a venting

system design or venting system components with the equipment, the instructions provided by the

manufacturer for installation of the equipment and the venting system shall include:

1. Detailed instructions for the installation of the venting system design or the venting system

components; and

2. A complete parts list for the venting system design or venting system.

(d) MANUFACTURER REQUIREMENTS – GAS EQUIPMENT VENTING SYSTEM NOT PROVIDED. When

the manufacturer of a Product Approved side wall horizontally vented gas fueled equipment does not

provide the parts for venting the flue gases, but identifies “special venting systems”, the following

requirements shall be satisfied by the manufacturer:

1. The referenced “special venting system” instructions shall be included with the appliance or

equipment installation instructions; and

2. The “special venting systems” shall be Product Approved by the Board, and the instructions for

that system shall include a parts list and detailed installation instructions.

(e) A copy of all installation instructions for all Product Approved side wall horizontally vented gas

fueled equipment, all venting instructions, all parts lists for venting instructions, and/or all venting

instructions shall remain with the appliance or equipment at the completion of installation.