Eltax AVR-320 Manual Do Utilizador

3 

IMPORTANT SAFETY INSTRUCTIONS 

1.  READ AND FOLLOW INSTRUCTIONS: All the safety and operation instructions should be read before the product is operated. 

Follow all operation instructions within this manual. 

 

2.  RETAIN THESE INSTRUCTIONS: The safety and operation instructions should be retained for future reference. 

 
3.  HEED WARNINGS: Comply with all warnings on the product and in the operation instructions. 

 

4.  CLEANING: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp 

cloth for cleaning. 

 

5.  GROUNDING OR POLARIZATION: This product may be equipped with a polarized alternating current line plug (a plug having one 

pin wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the 

plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician since it is likely you have an out 

of sate wall socket. Never force the plug into the socket. 

 

6.  OVERLOADING: Do not overload wall outlets or extension cords as this can result in the risk of fire or 

electric shock. Overloaded AC outlets, extension cords, frayed power cables, damaged or cracked wire 

insulation, and broken plugs are dangerous. They may result in electric shock or fire hazard. 
Periodically examine the power cable - if its appearance indicates damage or deteriorated receptacles 

have it replaced by your service technician. 

 

7.  POWER SOURCES: This product should be operated only from the type of power source indicated on the rear panel label. If you are 

not sure of the type of power supply to your home, consult your product dealer or local power company. For products intend to be 

operated from battery power, or other sources, refer to the operation instructions. 

 

8.  ACCESSORIES: Do not place this product on an unstable surface or support. The product may fall, causing 

serious injury to a child or adult as well as serious damage to the product. Any mounting of the product should 

follow the manufacture’s instructions and use a mounting accessory recommended by the manufacturer. A 

product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces 

may cause the product and cart combination to overturn. 

 

9.  OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be 

sure the antenna or cable system is grounded so as to provide some protection against voltage surges and 

built-up static charges. The example below is for reference only. Correct grounding should always be installed by an electrician. 
 

 

ANTENNA

LEAD  IN
WIRE

ANTENNA
DISCHARGE  UNIT

(NEC  SECTION  810-21)

GROUNDING  CONDUCTORS

(NEC  SECTION  810-21)

GROUND  CLAMPS

POWER  SERVICE  GROUNDING
ELECTRODE  SYSTEM

(NEC  ART  250.PART  H)

ELECTRIC

SERVICE
EQUIPMENT

GROUND

CLAMP

 

 

10. POWER CABLE PROTECTION: The power supply cables should be routed so that they are not likely to be walked on or pinched by 

items placed upon or against them, paying particular attention to cables at plugs and the point where they exit from the product. 

 

11.  ATTACHMENTS: Do not use unauthorized attachments as they may cause faults with the unit.