Edirol R-09 Manual Do Utilizador

 

Recording

 

Set the [EXTERNAL MICROPHONE TYPE Switch] to the type of microphone connected 
to the [MIC Input Jack].

 

• When connecting a dynamic microphone or a battery-powered microphone, be sure to use the 

<Menu Screen> to set the unit so plug-in power is not supplied to the microphone. Damage may 
result if the wrong setting is used.

• If a cable is connected to the [LINE IN Jack], then no sound is input through the [MIC Input Jack].

 

The durable dynamic microphone is suitable for vocal or instrumental recordings. It does not 
require a power supply.

 

The sensitive condenser microphone is suitable for recording quiet sounds such as live instrumentals 
or meetings. It requires a power supply from either batteries or plug-in power.

Only the L channel is recorded when a monaural microphone is used with the external microphone 
type switch set to stereo microphone. When monaural microphone settings are used, the L and R 
channels record the same sound (stereo).

 

Connect a microphone to the [MIC Input Jack] on the R-09.

 

To monitor the sound while recording, connect headphones to the [HEADPHONE jack]. Feedback 
may occur when external speakers are connected, so please do not use speakers.

 

Adjust the volume for the recorded sound.
Follow the procedures in “Adjusting recording levels” (p. 37) to adjust the level.

 

Use the <Menu Screen> to switch OFF power intended for 
plug-in powered microphones only (p. 82).

 

Use the <Menu Screen> to switch ON power for plug-in 
powered microphones (p. 82).

 

 

R-09_e.book 35 ページ ２００６年４月６日　木曜日　午後４時５１分