Cirkuit Planet GT-802 Folheto

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

●  Comply with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-

TX,  IEEE  802.3ab  1000Base-T,  IEEE  802.3z  1000Base-
SX/LX Ethernet standard

●  Bridge  mode  media  converter  with  TP  port  supports

10/100/1000Base-T and auto-MDI / MDIX

●  Auto-Negotiation  for  10/100/1000Base-T;  Half-duplex

or  Full-duplex  for  10Mbps  and  100Mbps,  full-duplex  for
1000Mbps

●  LED indicators for simple diagnostics and management

●  Compact in size, easy installation

●  OAM (TS-1000 and IEEE 802.3ah) supported

●  9K Jumbo frame supported

●  Can  be  installed  on  PLANET’s  10”/19”  Media  Converter

Chassis (MC-700/1000R/1500)

Your GT-80X carton should contain the following items:

> The Gigabit Ethernet Converter

> AC-DC Power Adapter (Output: 5VDC, 2A max.)

> This user’s manual

If  any  item  is  missing  or  damaged,  please  consult  the
dealer  from  whom  you  purchased  your  Gigabit  Ethernet
Converter.

Note

GT-805A  is  with  one  vacant  SFP  module  slot.
The  mini  GBIC  SFP  module  is  not  bundled
with in the package.

Note

To  prevent  from  optic  acceptor  malfunction,
check  the  both  wires  /  transmitter  before
power on the converter.

Step 1:  Connect  the  fiber  cable.  Attach  the  duplex  LC

connector  on  the  network  cable  into  the  SFP
transceiver.

Step 2:  Attach  fiber  cable  from  the  GT-805A  to  the  fiber

network. TX, RX must be paired at both ends.

Step 3:  Connect  the  5VDC  power  adapter  to  the  GT-805A

and verify that the Power LED lights up.

Step 4:  Turn  on  the  power  of  the  device/station;  the  PWR

LEDs should light when all cables are attached.

Figure 6:  GT-805A installation

Figure 3:  GT-806A15/B15/A60/B60

Left:  Fiber-optic  connector,  Right:  TP  connector.  Two  LED
indicators for TP / fiber port.

Figure 4:  One DC jack for DC power input.

One DC jack for DC power input.

Your  Gigabit  Ethernet  Converter  comes  with  one  of  the
following models.

GT-802

10/100/1000Base-T to 1000Base-SX (SC)

GT-802S

10/100/1000Base-T to 1000Base-LX (SC)

GT-805A

10/100/1000Base-T to 1000Base-SX/LX (SFP)

GT-806A15 10/100/1000Base-T to 1000Base-LX (WDM)

GT-806B15 10/100/1000Base-T to 1000Base-LX (WDM)

GT-806A60 10/100/1000Base-T to 1000Base-LX (WDM)

GT-806B60 10/100/1000Base-T to 1000Base-LX (WDM)

In  the  following  sections,  the  term

“GT-80X”  indicates  the

product  family  above,  the  term  “MM”  and  “SM”  represent
Multi-Mode and Single Mode fiber-optic mode.

Note

Please  note  GT-806A15/806B15  and  GT-
806A60/806B60  is  designed  to  work  together.
It means you must connect GT-806A15 to GT-
806B15  or  GT-806A60  to  GT-806B60  in  pairs.
If  both  ends  are  GT-806A15  or  GT-806A60
and  GT-806B15  or  GT-806B60,  or  any  above
model  to  any  3rd  party  device,  they  can’t
work  normally  and  may  damage  the  fiber
connectors.

Figure 1:  GT-802/GT-802S

Figure 2:  GT-805A

To  install  a  GT-80X  stand-alone,  on  a  desktop  or  shelf,
simply complete the following steps:

Step 1:  Turn  off  the  power  of  the  device/station  in  a

network to which the GT-80X will be attached.

Step 2:  Ensure that there is no activity in the network.

Step 3:  Attach  fiber  cable  from  the  GT-80X  to  the  fiber

network. TX, RX must be paired at both ends.

Step 4:  Connect  the  5VDC  power  adapter  to  the  GT-80X

and verify that the Power LED lights up.

Step 5:  Turn  on  the  power  of  the  device/station;  the  PWR

LEDs should light when all cables are attached.

Figure 5:  GT-80X installation

Note

It  is  recommends  using  PLANET  MGB-SX  /
MGB-LX  series  1000Base-SX/LX  SFP  on  the
converter.  If  you  insert  a  SFP  transceiver
that  is  not  supported,  the  converter  will  not
recognize it.

The  GT-80X  is  one-channel  media  conversion  between
10/100/1000Base-T and 1000Base-SX/LX. 10/100/1000Base-
T  port  can  work  under  Auto-negotiation  mode.  1000Base-
SX/LX  fiber  port  only  allow  to  work  under  fixed  1000Mbps
full duplex mode.