Cisco Systems 1.4 Manual Do Utilizador

Personal Assistant uses the directory Cisco CallManager is using to maintain system configuration 
information such as corporate directory settings and some user information such as call routing rules and 
user recorded names. In a typical configuration, Cisco CallManager uses its internal directory, DC 
Directory. When Cisco CallManager is in a cluster, Personal Assistant maintains information on the 
publisher server. If Cisco CallManager is using its internal directory, you can specify the directory 
configuration to have Personal Assistant read information from an available subscriber server in the 
same cluster if the publisher is unavailable.

Note that because Personal Assistant can only read information from a subscriber server, it cannot 
update configuration information unless the publisher is in service.

To specify the Cisco CallManager internal directory configuration, you identify the subscriber servers 
in the Cisco CallManager cluster.

Do the following procedure only if you are using Personal Assistant version 1.4(3) or later and if 
Cisco CallManager is using its internal directory.

In the Personal Assistant Administration, select System > Cisco CallManager Directory. The 
Cisco CallManager Internal Directory Configuration page opens.

In the Cisco CallManager Subscriber Server field, enter the host name or the IP address of the subscriber 
server, and click Add.

Personal Assistant adds the server to the list of subscriber servers for the Cisco CallManager cluster.

Repeat 

 for each subscriber server.

Click Save to save and activate your changes.

You must configure each Personal Assistant server to define its operating characteristics and to add it to 
the server cluster.

In the Personal Assistant Administration, select Servers > Server Configuration. The Server 
Configuration page opens.

This page has two columns:

The left column lists the Personal Assistant servers you have already added to the Personal Assistant 
server cluster. Click a server name to view and change the server properties. The primary 
Personal Assistant server is indicated by a red arrow.