The Niagara SCX Web Interface does not require software and works with any computer that has a
current web browser and current operating software for Windows, Macintosh, and Linux machines. The
encoder system must either reside on a shared IP network with the computer or can be directly connected
to a Windows computer using an Ethernet cable (RJ-45).

Open the web browser on your computer and access the web interface by typing in the encoder network
name. The network name of the encoder is also its serial number and can be obtained from the LCD
readout during the power-up process.

The serial number is also located on the right side of the encoder.

Enter the encoder name in the web browser (as shown below) and press enter.

You will be prompted with a login screen that requires a user name and password. By default, the user
name and password are both admin.

Note

If you cannot browse to the encoder by using its machine name, type in the encoder IP address instead.
This information is available by accessing the LCD menus on the front panel of encoder.