Carrier Access Network Device Axxius 800 Manual Do Utilizador
4-10
Axxius 800 - Release 2.2
Configuration
Basic System Setup
Set Up a Single Channel POTS card
Use the following commands to set up a POTS card.
Change the IP Address of the DS0 Management Channel
Use the following commands to change the IP over DS0 Management Channel for the
Axxius 800.
Axxius 800.
Command
Description
set {fxsPS-addr|fxsPSM-addr}
{ls|lsrb}
set {fxsPS-addr|fxsPSM-addr}
rxgain {n}
Set the receive gain/loss in dB. See the set
(fxsPS or fxsPSM) command for details.
(fxsPS or fxsPSM) command for details.
set {fxsPS-addr|fxsPSM-addr}
txgain {n}
Set the transmit gain/loss in dB. See the set
(fxsPS or fxsPSM) command for details.
(fxsPS or fxsPSM) command for details.
Command
Description
set ipds0 down
Set the DS0 management channel down
set ipds0 ip address {ip-addr}
Set the DS0 management channel IP address.
set ipds0 up
Set the DS0 management channel up.