Canon Microfilm Scanner 350 Manual Do Proprietário

■ SETTING THE SCANNER ■

NOTE

Note feature

This feature lets you include a short note on your print. You must
enter the note into memory before making the print, as described
below. The note can be changed later on.

•

Maximum note length is 33 characters.

•

The note is printed in the same location for the date. If you
choose to print both the date and the note, the date appears
first, then a space, and then the note.

Entering the note

The procedure below explains how to enter a note. The MS350
saves the note in non-volatile memory that is retained even while
power is off.

The following table shows the characters that you can use for your
note. You select each character by inputting the corresponding
code value.

1. Hold down the NOTE key for about 2 seconds.

The [NOTE] lamp, Brightness display and Print/Error display
begin to blink, indicating that you can now enter the note.

2. Confirm that the leftmost lamp on the brightness display is

blinking.

3. Referring a table of the character codes shown below, press

the Print Number Setting key (+ or –) to select and display a
character on the Print/Error display.

To select the letter A, for example, you would enter the
code value 41.

Code

Code 20 sets blank

20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F

Character

(

)

Code

5B 5C 5D 5E 5F 7B 7C 7D 7E 7F

Character

[

]

{

}

Character

;

Code

30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F

Code

40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A

Character

@ A

W X

Code

60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A

Character

4. Press the Brightness Adjustment ( ) key once to move to the

second letter of the note. Enter the letter code for the second
letter, again using the plus (+) or minus (–) key.

5. Continue as described above until you have entered all the

letters for your note.