Canon Leather Soft Case 70 Guia Do Utilizador

High-Power Flash HF-DC1

This flash is used to supplement the camera's built-in flash when 
the subject is too far away for proper illumination. Use the following 
procedures to affix the camera and High-Power Flash to the 
supporting bracket. 
Please read the instructions accompanying the flash along with this 
explanation. 

Using an Externally Mounted Flash

(Sold Separately)

z The flash charge time will lengthen as the battery charge 

gets weaker. Always set the power/mode switch to [OFF] 
when you finish using the flash.

z Be careful not to touch the flash window or sensor 

windows with your fingers while the flash is in use.

z The flash may fire if another flash is being used in close 

proximity.

z The High-Power Flash may not fire outdoors in daylight or 

when there are no reflective items.

z For continuous shooting, although the flash fires for the 

first shot, it does not fire for subsequent shots.

z Fasten the attachment screws securely so that they do not 

loosen. Failure to do so may lead to the dropping of the 
camera and flash resulting in damage to both.

Tripod 
Sockets

Bracket
(Comes with the flash)