Avaya Media Gateway G700 Manual Do Utilizador

3. Make sure everything except ENV, arbiter, and dupmgr shows UP. Communication 

Manager should show 65/65 UP or, if IA770 is installed, 67/67 UP.

The number of processes (67/67) may vary depending on the configuration. For a normal 
state, the second number should not be greater than the first number. For example, the 
numbers 66/67 UP would indicate that a process did not come up and should be 
investigated before proceeding.

4. Using a telephone, make test calls to verify that call processing is working.

5. Run an IA770 sanity test:

a. At the Linux command line, type /vs/bin/display

b. All states should be Inserv with an associated phone number.

c. Retrieve the test message saved before the upgrade. 

If you have upgraded your Communication Manager and IA 770 INTUITY AUDIX software, you 
must have a new license that is associated with the latest release. IA 770 will not use the 
license for a previous version. 

If you upgraded IA 770 without a new license file, it will fail to start during the Communication 
Manager startup sequence.

If this occurs, you must do the following steps:

1. Obtain an IA 770 Replace variable w/ release number license file.

2. Install the license file.

3. From a command prompt, start the IA 770 process with the following command:

Telnet to the S8300 (primary controller) and open a SAT session:

1.

2.

3.

4.