Avaya 1.3 Manual Do Utilizador

The TCP/IP addressing information that is administered during DLG administration is 
particularly relevant to installing the Telephony Services software (see 

on page 47). Make sure you have the following addressing information 

before you start the Avaya Computer Telephony server software installation procedure.

●

The IP address of the DLG. The default is 192.168.25.10, but it is highly likely that this 
has been changed to conform to your network addressing requirements.

●

The IP address that the DLG administrator assigned to the Avaya Computer Telephony 
server. The default is 192.168.25.20. Again, it is highly likely that this IP address has 
been changed to conform to your network addressing requirements. This IP address 
refers to the Network Interface Card, on the Avaya Computer Telephony Server, that 
communicates with the DLG. It is not the IP address of the NIC, on the Avaya Computer 
Telephony server, that communicates with clients.

●

The host name or IP address that was assigned to the Avaya Computer Telephony 
server.

Determining the requirements of your configuration involves identifying the Avaya 
Computer Telephony software components you are going to implement. Basically this 
comes down to one question: “does this configuration support both the Tserver (Telephony 
Services Server) and the CVLAN (CallVisor PC Local Area Network) applications?" See 

 for information about CVLAN.

If you are upgrading an earlier release of Avaya Computer Telephony, see 

See 

to make sure that you have the appropriate hardware and software.