Avanti WDB101 Manual Do Utilizador
6
Step 5: Installing the Anti‐Tip Safety Bracket:
a) Attach the Anti‐Tip Safety Bracket (Parts G and H) to
the Stacking bracket as shown. By joining the two
(2) parts using the Phillips Head Screw and Nut
(Parts K and N).
(2) parts using the Phillips Head Screw and Nut
(Parts K and N).
b) Align the assembled Stacking bracket in place and
mark where the Anti‐Tip Safety Bracket is to be
attached to the wall.
attached to the wall.
c) Using the Wall Anchors and Self Tapping Phillips
head screws (Parts L and M) included to attach the
assembled Stacking bracket to the wall.
assembled Stacking bracket to the wall.
Step 6: Installing Your Avanti Dryer (Model D110) to the
top shelf.
top shelf.
In order to place your Avanti Dryer (Model D110) on the stacking kit you
must first remove the four (4) leveling legs from the bottom of the dyer.
must first remove the four (4) leveling legs from the bottom of the dyer.
a) Place the Dryer on the top shelf.
b) Re‐install the four (4) leveling legs previously removed through
the underside of the top shelf and tighten until the dryer is
secure.
secure.